@designprinter-isrealĀ·Mar 10Hey, I'm Haim ā a professional 3D designer.
Inside the membership you get:
š STL File Library ā Print-ready designs, new files weekly
š Tutorials ā Machine setup, calibration, slicing, advanced techniques
š¬ Community Chat ā Ask questions, share prints, get feedback
š¢ Updates ā First look at new designs
Grab access and let's start printing! šØļø
@designprinter-isrealĀ·Mar 10I've been designing for 3D printers for years, and I see the same mistakes over and over.
Here are 5 slicer settings that eliminated almost all my failed prints:
1. First layer height ā 0.28mm (not 0.2). Gives better bed adhesion without sacrificing quality on the rest of the print.
2. Print speed for first layer ā 20mm/s max. Most people leave this at 50+. Slow it down. Your first layer is everything.
3. Retraction distance ā 6mm for Bowden, 1mm for direct drive. Wrong retraction = stringing nightmares.
4. Cooling fan ā 0% first layer, 100% from layer 3. This alone fixes warping on PLA.
5. Z-offset micro-adjust. Even if your BLTouch says you're level, manually nudge it -0.02 to -0.05. Feel the first layer with your finger ā it should be smooth, not rough.
These 5 changes took my success rate from ~70% to 95%+.
I share detailed tutorials and print-ready designs inside DesignPrint Pro ā come join if you want to stop wasting filament. šØļø
